WF 610 M

Universal tilting-swiveling table

The universal tilting and swiveling table allows you to position the workpiece in different angular positions. Adjustment is done manually with the rotation angle of the clamping plate being indicated on a digital readout.

• adjustable in 3 axes
• rotational angle: 360°
• swiveling range: +/-30°
• tiltable away from machine by 15°, tiltable towards machine by 35°
• table dimensions: 650 x 395 mm
• 6 T-grooves 14 H7 (63 mm clearance)
• centering hole: 32 mm
• max. table load: 220 kg

Electronic handwheel

The portable device supports the operator in setting up and retooling the machine due to a close view on the working area.
The handwheel features axis keys, keys for feed rates, and control keys for the machine.

Horizontal spindle and arbor holder

For horizontal milling, you can conveniently separate and pivot the vertical milling head on a support arm.

A further option is working with an arbor holder for additional stability.
It allows the use of long cutter spindles with one or more disk milling cutters up to a diameter of 150 mm.

The protective windows are attached to the angular table and can be hinged up and down.

Splash guard cabin

The cabin offers excellent accessibility to the working area through two large front sliding doors and an additional door on the right machine side. 
Automatic Full Sequence Run Mode
In combination with our limit-switch protected cabin, you may also use the Automatic Mode (Full Sequence Run Mode).

Minimum-quantity lubrication system

As an alternative to conventional cooling, tools can also be cooled with an oil-air mixture over special cooling nozzles.
This technology allows dry and waste-free manufacturing.

Touch probe systems

Combined with the probing cycles of the control, triggering 3D touch probe systems facilitate setup, measuring, and monitoring during manufacturing.

Tool measurement

The following tool data is precisely determined via control cycles:

• tool length
• tool radius
• tool wear

CNC dividing unit

The CNC dividing unit is used for direct and indirect dividing with a direct dividing plate and a 24-notch dividing plate.

Center height: 100 mm
including tailstock

HEIDENHAIN TNC7 go Positioning Control

The WF 610 M is a manually operated machine featuring an easy-to-use path control system and a 16-inch touch screen.
Operation is workshop-friendly, utilizing dialogs, cycles, and graphical assistance.

Programming: The control system employs user-friendly plain-text dialog commands, comparable to those found in other Heidenhain CNC controls.

Safety Function: The AFR function developed by KUNZMANN automatically adjusts the feed rate based on spindle load, effectively preventing overload damage.

User Selection: A key switch allows selection between three operating modes, with the key being removable. The system enables customization of the control scope according to the user’s qualification level.

1.) Manual Mode (3-axis digital readout)

• Manual axis movement using directional keys
• Step increment function
• Definition of feed rates and spindle speeds
• Automatic feed without target value input
• Input and execution of a target positioning block with absolute and incremental/chain dimensions, radius compensation
• Visual display of remaining travel distance
• Graphical positioning
• Display of spindle and axis load
• Tool and workpiece offset tables
• Probing functions for setting reference points (edge, centerline, circle center)
• Electronic handwheel (optional)

• Manual Data Input (MDI) – input and execution of multiple target positioning blocks
• Programming
• Graphical simulation
• Single block program run
• Oriented spindle stop

• Manual Mode” and “Single Run Mode” functions and additionally
• “Full Sequence Run” (automatic run of operating cycles and NC programs)
• “Approximate Radius” option

You can download our product brochures and layouts here:

	KUNZMANN WF 610 M product brochure
	KUNZMANN StateViewer
	KUNZMANN WF 610 M layout